Home UPS Office Building Gtec Power CPS

Gtec Power CPS

UPS for emergency applications

UPS designed to supply power for emergency alarm devices such as smoke alarm, carbon monoxide detectors and for other alarm and security systems according to the requirements of European Standard: EN 50171.
Gtec Power CPS
Gtec Power CPS
Gtec Power CPS
I am not a robot!  
A high reliable, online double conversion UPS designed to meet all the requirements by EN 50171 European Standard for emergency devices therefore this equipment could be wired to ensure an excellent operation of all the safety equipments like smoke alarms, CO detectors, emergency lighting and signs, fire alarm, fire suppression, and fire extinguishing systems, and all other emergency devices.

Based on the standard, the following main features should meet among others:
  • Sized to support continuous overload of up to 120% of rated output power with no time limit.
  • Shorter recharge time. Means 80% of recharge within 12 hours
  • Double input that allows a simplified and safe periodical maintenance of the UPS, because the maintenance work is carried out leaving active the bypass line, which continues load supporting.
  • Protection against reserved polarity, what provides additional safety for service persons during repair and maintenance operations, and prevents damage of the unit.
  • Up to 1 hour and up to 3 hours autonomy configurations, according to the standards and both within the above mentioned quick recharging capability with strong temperature compensated chargers sized to requested battery capacity.
The Power CPS range as a double conversion online UPS has all the other high technology features like the others in this power and professional range, like high efficiency, advanced communications, high rate of active power, compact size, detailed LCD display, and others.

 
Reliability
  • Online double conversion system.
  • Strong battery charging system and two ranges based on 1 hour and 3 hours autonomy to recharge within the time frame required by EN 50171
  • 10 years plus professional batteries for additional safety
  • Protection against reversed polarity.
  • Continuous overload capability of up to 120% of rated output power with no time limit.
  • Double input
  • Wide input voltage range while steady output.
  • Intelligent battery management with scheduled and manual battery test.
  • Adjustable output voltage and frequency
  • Very low input THDI ≤ 3% for IGBT rectifier models
 
Flexibility
  • 6-15 kVA single/three phase input and single phase output.
  • 10-100 kVA three phase input and output.
  • Cos φ = 0,9 output power factor for the great level of active power.
  • Compact size with batteries included.
  • Very high efficiency: up to 99% in Smart Active Mode
  • Advanced software support with several adjustment and setting possibilities and with free shutdown software.
  • Detailed LCD+LED display
  • Multichannel communication on several protocols (RS232, USB, SNMP, AS400, ModBus)
  • Remote EPO (Emergency Power Off) connector
UPS Technologies
Delivery Time
4-6 weeks, depends on the requested configuration
Warranty
2 years site warranty from installation
Installation and setup
We install the units according to personalized offer in every case. In case of cabling and power network reconstruction and installation demand, please always request for quotation, and we send you a personalized offer!
UPS pricelist

Write a mail to us!

I am not a robot!  

« Office Building

This website uses cookies for your convenient browsing. I accept
Close
close